![]() PEMSA cable trays can maintain their form and strength is temperatures as low as -50º and won’t be effected up to 150º for some time. The high resistance, sufficient spacing and choice of depth mean that PEMSA products can be specified correctly based on the unique needs of each end-user.Īs mentioned above, the PEMSA wire mesh tray does not retain heat and stainless steel is a very poor conductor. Although cable tray are low-maintenance, these convenient sections allow for easy access should an issue occur.īasket tray is primarily used for telecommunication and fiber optics installations and is typically installed on short support span. It also means dust is not allowed to settle in the cable tray and therefore does not require frequent cleaning. The wire mesh bars can simply be cut and bent to form the required accessory.Īnother feature is that the open spaces between the bars allow heat to escape, which keeps the cable cool and significantly reduces the risk of overheating. One of the main benefits of wire mesh tray is that it tends to be cheaper and quicker to install due to the fact that it is designed to be specifically configured on-site without needing factory manufactured accessories such as bends, tees and risers. It’s also important for contractors and installers to consider how efficiently they can handle the product while knowing they can guarantee a strong final result. When it comes to choosing the best cable tray, it’s important to consider what is expected from a cable management system. In actuality, both options are manufactured to the same European standards (IEC 61537), so the real question is not which is the best, but rather how do I choose which is the best option for my project? Why choose PEMSA Cable Tray We have a CE certificate in compliance with the low voltage directive 2014/35 / EU and the approval of London Underground for railway installations, tunnels and underground infrastructures.When it comes to cable management, there are often many debates over whether to use cable basket or cable tray. Megaband® PG has been developed, like all of our products, according to tests and approvals in our laboratories according to the parameters of the international standard of trays IEC61537 and has complied with all of the requirements. Wide range of accessories, 90º and 45º bends, crossovers, Tees, level changes, etc., which all have the same technical characteristics as the straight ladder section, integrated couplers, corrosion resistance, etc.It facilitates the click connection of the straight cover without the need for any fixings. Safety edge thanks to the rounded profile of the side rail.Alternate rungs increase cable fixing options.High quality Pre-galvanised finish, achieving Class 3 corrosion resistance.High load capacity with a range of 190 to 250 kgs at a distance of 2 metres between supports.No couplers are required, just the appropriate M8 nuts and bolts. Reinforced clinching system for the connection of the rung and the siderail.The rungs are mounted alternately up and down to allow the fixing of the cables.The ladder rungs are mounted alternately up and down to allow the fixing of the cables and it is available in heights of 60, 85, 100, 120 and 150 mm and widths from 100 to 1000 mm. Its highlighted features are the easy assembly using the click system for quick connection between lengths and accessories, and the guaranteed maximum load capacity. Pemsa launches its new product, Megaband® PG Pre-galvanised. The main feature of Megaband® pre-galvanised is its reinforced clinching system for the connection of the ladder rung and the siderail.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |